NSX-T V6-3.2L DOHC (VTEC) (1997)
/Page-80001.png)
Headlamp Relay: Testing and Inspection
Retractor Cut/Taillight Relay Test
1. Remove the retractor cut relay and taillight relay.
Taillight Relay
Retractor Cut Relay
2. Check continuity at the relay terminals.
^ There should be continuity between the C and D terminals.
^ There should be continuity between the A and B terminals when power and ground are connected to the C and D terminals.
^ There should be no continuity between the A and B terminals when power is disconnected.
