NSX-T V6-3.2L DOHC (VTEC) (1997)
/Page-3779004.png)
Mode B
12. Check continuity between the No. 7 terminal and body ground, and between the No. 8 terminal and body ground.
-
If there is continuity, the passenger's airbag inflator is faulty. Replace it and recheck the voltages according to the chart.
-
If there is no continuity, the SRS main harness is faulty. Replace it and recheck the voltages according to the chart.
Mode B
13. Disconnect the driver's and passenger's tensioner connectors between the SRS main harness and the floor wire harness. First, connect test harness
C to the floor wire harness side of the driver's tensioner, and check continuity, then connect it to the floor wire harness side of the passenger's
tensioner 3P connector, and check continuity again.
Mode B
14. Check continuity between the No. 7 terminal and body ground, and between the No. 8 terminal and body ground.
-
If there is continuity, go to step 15.
-
If there is no continuity, the SRS main harness is faulty. Replace it and recheck the voltages according to the chart.
Mode B
15. Disconnect the 3P connector from the driver's and passenger's seat belt tensioners, then connect test harness C to the seat belt tensioner side of the
connector, first on the driver's side, then on the passenger's side.
