NSX-T V6-3.2L DOHC (VTEC) (1997)
/Page-3779006.png)
Mode B
19. Connect test harness D between the dash sensor and SRS main harness 2P connector. Check the resistance between the No. 1 terminal and No. 2
terminal.
-
If resistance is 3.8-4.2 K-ohms, the SRS main harness is faulty. Replace it and recheck the voltages according to the chart.
-
If resistance is less than 3.8 K-ohms, the dash sensor is faulty.
SRS Indicator Light Stays On Continuously
-
Replace it and recheck the voltages according to the chart.
