acura Workshop Repair Guides

Acura (Honda) Workshop Manuals

< PREV PAGE NEXT PAGE >
Page 1
background image

Door Sensor/Switch (For Alarm): Testing and Inspection

1.  Remove the door panel.

Door Switch Test

2.  Disconnect the 2P connector from the door lock actuator assembly.

Door Switch Test

3.  Check continuity at the door switch connector terminals.

^  There should be continuity between the A terminal and B terminal with the door open.
^  There should be no continuity between the A and B terminals with the switch pushed (door closed).

Sensors and Switches > Sensors and Switches - Accessories and Optional Equipment > Door Sensor/Switch (For Alarm) > Component Information > Testing and Inspection

< PREV PAGE NEXT PAGE >