acura Workshop Repair Guides

Acura (Honda) Workshop Service and Repair Manuals

Electrical - GR8 Battery Diagnostic Station Update Info.|Page 5864 > < Electrical - GR8 Battery Diagnostic Station Update Info.|Page 5862
Page 1
background image

Battery: Technical Service Bulletins
Electrical - ED-18 Battery Analyzer Update Info.

09-02?

February 12, 2011

Applies To: 
All Acura Vehicles

ED-18 Battery Analyzer Update Information
(Supersedes 09-027, dated June 30, 2009, to revise the information marked by the asterisks)

*REVISION SUMMARY

Under SOFTWARE VERSION, the method to check the current software was updated.*

INTRODUCTION

The software for the ED-18 Battery Analyzer (or tester) is updated periodically to fix software bugs and enhance the tool's function. To help you update
the ED-18 tester more quickly, Acura no longer distributes CDs for the tester. You can now use the Midtronics ED-18 update wizard to download
software and firmware to your ED-18 tester using a PC and the Internet. It is extremely important to use the latest ED-18 software to ensure that the
current battery testing procedures are used.

Acura introduced a new policy to ensure that ED-18 testers are updated promptly. The ED-18 software must now be updated within 3 days of receiving
notification from an iN message or other Acura communication. If an out-of-date version is used, any battery replacements may not be covered under
warranty.

ED-18 UPDATE REQUIREMENTS

^

ED-18 Battery Analyzer:
ED-18 Version 1: P/N INBED18LLH 
ED-18 Version 2: P/N INB17191845

^

R5232 (25 pin to 9 pin) interface cable:

P/N MTRi30ii2A*

^

7/64" hex wrench: P/N INB17191270*
*Both the R5232 interface cable and the hex wrench 
were included with the ED-18 update that was 
shipped to dealerships in November 2008.

^

A fully charged 12-volt automotive battery, any size

^

Internet access

^

An IBM-compatible PC:

-

Windows 95 operating system or higher (Windows 2000 or XP is preferred)

-

CD ROM

-

R5232 (9 pin) serial port, or an R5232 to USB
Adapter (P/N MTRA164)
(Some newer computers do not have an R5232
port. You will need to order the R5232 to USB
adapter to update your ED-18 testers.)

To order the ED-18 Battery Analyzer version 2, the interface cable, the R5232 to USB adapter, or the hex wrench, go to the Acura Tool and Equipment
catalog on the iN (select Service > Service Bay > Tool and Equipment > Online Catalog), or call.

NOTE

The ED-18 Battery Analyzer version i is no longer available for purchase.

SOFTWARE VERSION

Electrical - GR8 Battery Diagnostic Station Update Info.|Page 5864 > < Electrical - GR8 Battery Diagnostic Station Update Info.|Page 5862