NSX-T V6-3.2L DOHC (VTEC) (1997)
/Page-3243006.png)
17. Confirm the software on the ED-18 tester is updated to the software version listed under SOFTWARE VERSION.
NOTE:
If you have any problems updating the ED-18, call Midtronics at 866-592-8054.
18. Reinstall the printer.
19. If you have more than one ED-18, repeat the update procedure for each unit.
20. Once all ED-i8s are updated, store the R5232 interface cable and the hex wrench in a safe location for future updates.
Disclaimer
