NSX-T V6-3.2L DOHC (VTEC) (1997)
/Page-2850009.png)
15. Align the marks, then install the differential housing cover.
16. Tighten the mounting bolts in a crisscross pattern in several steps.
17. Measure the preset torque.
-
Standard: 59 - 137 Nm (43 - 101 ft. lbs.).
-
If the preset torque is more than the standard, select a thinner 112 mm shim, and recheck the preset torque.
-
If the preset torque is less than the standard, select a thicker 112 mm shim, and recheck the preset torque.
