NSX-T V6-3.2L DOHC (VTEC) (1997)
/Page-5233002.png)
4. Pull back the upper part of the door trim and the front pillar trim.
5. Remove the screws holding the front roof rail trim, then remove the trim by sliding it backward.
6. Remove both hook stops.
7. Install the new hook stops (see PARTS INFORMATION).
[NEW]
8. Reinstall the roof rail trim, the pillar trim, the door trim, and the sun visors. Then perform the next procedure, Lubricating the Lock Pins, Roof
Seals, and Seat Panels.
