NSX-T V6-3.2L DOHC (VTEC) (1997)
/Page-5280001.png)
Windshield Washer Relay: Testing and Inspection
Low Relay Test
Low Relay Test
1. Remove the wiper low relay from under-hood relay box B.
Low Relay Test
2. Check continuity at the relay terminals.
^ There should be continuity between the C and D terminals.
^ There should be no continuity between the A and B terminals when power and ground are connected to the C and D terminals.
^ There should be continuity between the A and B terminals when the power is disconnected.
