NSX V6-3.0L DOHC (1991)
Radio/Stereo: Customer Interest
Antenna Mast Replacement
1.
Remove the antenna nut with the special tool.
2.
NSX only: Inspect the outer diameter of the antenna nut.
^
If the antenna nut does not have an O-ring around the outer diameter, go to Antenna Mast Kit Replacement (NSX Only).
^
If the nut has an O-ring around the outer diameter, continue with step 3.
3.
Turn the ignition switch ON; then turn the radio on to extend the antenna mast.
4.
Pull the antenna mast out of the antenna tube.