NSX V6-3.0L DOHC (1991)
Brake Bleeding: Service and Repair
With Anti-Lock Brake (ALB) Checker
Air Bleeding with ALB Checker
1. Disconnect the 6-P inspection connector (PNK) from the connector cover located under the glove box and connect the 6-P inspection connector to
the ALB checker.
CAUTION: Place the vehicle on level ground with the wheels blocked. Put the transmission in neutral for manual transmission models, or in
(P) range for automatic transmission models.
2. Fill the modulator reservoir to the MAX level line.
NOTE: Do not reuse aerated brake fluid that has been bled from the power unit.
3. Bleed high pressure fluid from the maintenance bleeder with the special tool.
4. Start the engine and release the parking brake.
NOTE: Depress the brake pedal firmly while test in progress light in ON.
5. There should be at least two strong kickbacks. If not, repeat steps 2 through 5, as necessary.
