NSX V6-3.0L DOHC (1991)
6.
Remove the four screws from the bottom of the clear plastic cover, then rernove the trip odometer reset knob.
7.
Separate the gauge assembly by carefully releasing the three tabs, then remove the gauge face plate.
8.
Remove the six screws holding the temperature/oil pressure gauge assembly and remove the gauge.
9.
Reassemble the gauge assembly with the new temperature/oil pressure gauge. Install the gauge assembly in the reverse order of removal.
PARTS INFORMATION
Oil Pressure Gauge
Sending Unit:
P/N 37245-PR7-A02
O-ring, 13 x 1.5 mm: P/N 91319-PR3-003
Temperature/Oil
Pressure Gauge:
P/N 78150-SL0-003
WARRANTY INFORMATION
In warranty:
The normal warranty applies.
Out-of-warranty: Any repair performed after warranty expiration may be eligible for goodwill consideration by the District Service Manager. You must
request consideration, and get the DSM's decision, before starting work.
Failed P/N:
P/N 37245-PR7-A01
Defect code:
039