NSX V6-3.0L DOHC (1991)
4. Install the timing belt in the sequence shown.
(1) Timing belt drive pulley (crankshaft)
(2) Adjusting pulley
(3) Front exhaust camshaft pulley
(4) Front intake camshaft pulley
(5) Water pump pulley
(6) Rear intake camshaft pulley
(7) Rear exhaust camshaft pulley.
5. Tension the timing belt between the pulleys in the sequence A to E as shown. Refer to timing belt tension adjustment.
6. Temporarily install the lower cover and crankshaft pulley.
7. Check the crankshaft pulley and the camshaft pulleys at TDC.
8. If the camshaft pulleys are not positioned at TDC, remove the timing belt and adjust the positioning of the pulleys, then reinstall the timing belt.
