NSX V6-3.0L DOHC (1991)
Fig. 4 Single Wire Feed Fusible Link
Fig. 5 Double Wire Feed Fusible Link
SERVICE PROCEDURE
-
To replace a damaged fusible link, Fig. 4, cut it off beyond the splice. Replace with a repair link. When connecting the repair link, strip wire
and use staking-type pliers to crimp the splice securely in two places. For more details on splicing procedures, see SPLICING COPPER
WIRE. Use Crimp and Seal splices whenever possible.
-
To replace a damaged fusible link which feeds two harness wires, cut them both off beyond the splice. Use two repair links, one spliced to each
harness wire, Fig. 5.