NSX V6-3.0L DOHC (1991)
Throttle Cable/Linkage: Service and Repair
Throttle Cable
1.
Loosen the cable locknut and remove the throttle cable from the cable bracket.
2.
Remove the cable from the throttle linkage.
3.
Remove the other end of the cable from the accelerator pedal.
4.
Re-install in reverse order.
Throttle Cable Adjustment
5.
Hold the cable sheath, removing all slack from the cable.
6.
Turn the adjusting nut until until it is 3 mm from the cable bracket.
Throttle Cable Deflection
7.
Tighten the locknut. The cable deflection should now be:
.39" - .47" (10 - 12 mm)
If not, re-adjust for proper deflection.