NSX V6-3.0L DOHC (1991)
Spark Plug: Service and Repair
Ignition Coil/plug
CAUTION:Ignition coils and plugs can become very hot in use, do not touch them: handle the ignition coils and plugs carefully.
1.
Remove the ignition coil covers.
2.
Disconnect the 2-P connectors from the ignition coils.
3.
Remove the ignition coils.
4.
Remove the plugs.
5.
Gap new plugs.
Gap to:
0.043 in. (1.1 mm)
6.
Reinstall plugs.
Torque to:
13 ft. lbs
7.
Install the ignition coils.
NOTE: Different ignition coils and ignition coil covers are used for the front side and rear side. Be sure to use correct ones when mounting them.
8.
Connect the 2-P connectors from the ignition coils.
9.
Reinstall the ignition coil covers.