NSX V6-3.2L DOHC (2001)
10. Apply new sealant to the body and rear pillar retainer on each side as shown.
11. Peel the separator off from the butyl tape on the new rear pillar seal.
NOTE: Fold the separator of butyl tape at the roof portion of the rea pillar seal.
12. Align the hole and clip on the rear pillar seal with the grommet and hole on the body, and engage the lips of the rear pillar seal with the groove of
the retainers, then gently set each corner of the rear pillar seal down on the sealant as shown.