NSX V6-3.2L DOHC (2001)
13. Remove the two bolts from the side engine mount near the alternator bracket. Pivot the mounting bracket into the housing of the body.
14. Remove the transmission mount.
15. Install a brace under the engine, then tilt the engine approximately 5° using a jack.
NOTE: Make sure to place a cushion between the oil pan and the jack.
16. Remove the alternator bracket stiffener and dipstick/pipe.
17. Loosen the idler pulley center nut and adjusting nut, then remove the Air Conditioning (A/C) compressor belt.
18. Remove the crankshaft pulley.
