NSX V6-3.2L DOHC (2001)
Cable Reel Installation
8. Install the driver's airbag assembly.
9. Connect the cable reel harness to the SRS main harness below the pedal bracket.
Cable Reel Installation
10. Connect the foot light harness and lights-on chime to the dashboard lower cover, then install the lower cover.
11. Remove the short connector (RED) from the passenger's airbag and the SRS Service Connector from the SRS main harness.
12. Reconnect the passenger's airbag 3P connector to the SRS main harness connector, then reinstall the glove box.
13. Remove the short connector (RED) from the driver's airbag and the SRS Service Connector from the cable reel.
14. Reconnect the driver's airbag 3P connector to the cable reel 3P connector. Attach the short connector (RED) to the access panel, then reinstall the
panel on the steering wheel.
15. Remove the short connector (RED) from both seat belt tensioners, then attach the short connectors (RED) to their holders.
16. Reconnect the floor wire harness connectors to the driver's and passenger's seat belt tensioners.
17. Reconnect the battery positive cable, then the negative cable.
