NSX V6-3.2L DOHC (VTEC) (1997)
Power Door Lock Actuator: Testing and Inspection
Driver's Door Actuator Test
1. Remove the door panel.
Driver's Door Actuator Test
2. Disconnect the 8P connector from the actuator.
3. Test actuator operation:
LOCK:
With battery power connected to the No. 7 terminal, connect ground to the No. 8 terminal momentarily.
UNLOCK: With battery power connected to the No. 8 terminal, connect ground to the No. 7 terminal momentarily.
CAUTION: To prevent damage to the motor, connect power and ground only momentarily.
4. If the actuator fails to operate properly, replace it.
Key Cylinder Switch
Door Lock Knob Switch