NSX V6-3.2L DOHC (VTEC) (1997)
Paint: Service and Repair
Repair Materials and Tools (Example)
Repair Materials and Tools (Example)
Vise-grips and clamps
-
To hold parts being serviced.
Sander:
Removal of paint caking and filler sanding.
-
Air sander, Double action sander
-
Pad (Rubber and wooden)
-
Sandpapers (#60,80,180,280,400,600 and 800)
Adhesive, cement and filler:
To even out irregular surface
-
Epoxy resin body filler (BOND QUICK MENDER 3M8016)
Protectors:
-
Respirator and dust mask
-
Rubber gloves, safety goggles
Masking tape: 19 mm (3/4")
Others:
-
Rag or shop towel, Cutter,
Paints: (Reference)
The paints used for repair should be flexible enough at low temperature -77 degrees F (-25 degrees C) yet not harm the resin base to which they are
applied. They should also offer reasonable resistance to abrasion and wear.
NOTE:
-
Do not use acrylic lacquer paints (air-dried type).
-
Be sure to use the paints listed below or equivalent.
1. Guide coat (Primer and Primer surfacer)
-
UPS-300 flex primer N0308 flex hardener (RM)
-
Plastoflex primer, Autocryl filler Elast-o-Actif (Akzo)
-
1020R primer surfacer 805R flexible additive (DuPont)
2. Intermediate coat
Use top coat (Solid, metallic or pearl) enamel base.
3. Top coat
-
Super ponacle N0308 flex hardener (R-M)
-
Autocryl, Auto base Elast-o-Actif Auto clear/ Autoclear MS Elast-o-Actif (Akzo)
-
Super Centari 805R softener AK210 hardener (DuPont) Main Menu Table of Contents