NSX V6-3.2L DOHC (VTEC) (1997)
Hard Top Weatherstrip: Adjustments
Seals/Retainers Alignment
Adjustment
NOTE: When the following parts have been replaced or removed, this adjustment should be done.
-
Roof side seals
-
Roof side lock units
-
Front and rear pillar seals
CAUTION: To prevent damage, place the roof on an appropriate pad.
1. Remove the roof front trim and roof side trim.
2. Install the roof side lock handle.
3. Turn the roof side lock handle to the locked position.
4. Loosen the roof side lock unit mounting nuts, then tighten them lightly.
5. Return the roof side lock handle to the unlocked position.
6. Remove the front and rear roof rail trim.