NSX V6-3.2L DOHC (VTEC) (1997)
Modulator/Solenoid Unit: Testing and Inspection
1. Disconnect the 6P inspection connector (PNK) from the connector cover located under the glove box, and connect the 6P inspection connector to
the ALB checker.
CAUTION: Place the vehicle on level ground with the wheels blocked. Put the transmission in neutral for manual transmission models, or in
PARK [P] for automatic transmission models.
2. Remove the modulator reservoir filter, then fill the modulator reservoir to the MAX level line.
CAUTION: Do not reuse aerated brake fluid that has been bled from the power unit.
3. Bleed high-pressure fluid from the maintenance bleeder with the special tool.
4. Start the engine and release the parking brake.
5. Turn the Mode Selector to 1, and press the Start Test button.