NSX V6-3.2L DOHC (VTEC) (1997)
Brake Rotor/Disc: Service and Repair
Rear
CAUTION: Replace the joint boot if damaged. The parts marked with an asterisk (*) have a retainer attaching the ball joints. Replace the retainer
whenever the boot is replaced. Do not remove the arms and knuckle by striking them with a hammer, and take care not to drop them. Make sure that the
reference marks on the toe control arm are alined.
REPLACEMENT
1. Remove the rear wheel and bearing unit assembly.
2. Remove the splash guard from the knuckle.