NSX V6-3.2L DOHC (VTEC) (1997)
Brake Caliper: Service and Repair
Disassembly
WARNING: Use an Occupational Safety and Health Administration (OSHA)-approved vacuum cleaner to avoid breathing brake dust.
CAUTION:
-
Never use an air hose or dry brush to clean brake assemblies.
-
Do not spill brake fluid on the vehicle; it may damage the paint; if brake fluid does contact the paint, wash it off immediately with water.
-
To prevent spills, cover the hose joints with rags or shop towels.
-
Clean all parts in brake fluid and air dry; blow out all passages with compressed air.
1. Remove the pad spring from the caliper.