NSX V6-3.2L DOHC (VTEC) (1997)
Brake Master Cylinder: Service Precautions
CAUTION:
-
Be careful not to bend or damage the brake lines when removing the master cylinder.
-
Do not spill brake fluid on the vehicle; it may damage the paint; if brake fluid does contact the paint, wash it off immediately with water.
-
To prevent spills, cover the hose joints with rags or shop towels.
-
Before reassembling, check that all parts are free of dust and other foreign particles.
-
Do not try to disassemble the master cylinder assembly. Replace the master cylinder assembly when necessary.
-
Make sure no dirt or other foreign matter is allowed to contaminate the brake fluid.
-
Always use DOT 3 Brake Fluid. Using a non-DOT 3 brake fluid can cause corrosion and decrease the life of the system.
-
When connecting the brake lines, make sure that there is no interference between the brake lines and other parts.