NSX V6-3.2L DOHC (VTEC) (1997)
Cigarette Lighter Relay: Testing and Inspection
1. Remove the glove box.
2. Disconnect the 4P connector from the cigarette lighter relay (wire colors of 4P connector: BLU/GRN, YEL/RED, BRN/YEL, BLK).
Cigarette Lighter-Relay Test
3. Check continuity at the relay terminals.
-
There should be continuity between the C and D terminals.
-
There should be continuity between the A and B terminals when power and ground are connected to the C and D terminals.
-
There should be no continuity between the A and B terminals when power is disconnected.