NSX V6-3.2L DOHC (VTEC) (1997)
Air Bag: Service and Repair
Installation
INSTALLATION
CAUTION
- Be sure to install the SRS wiring so that it is not pinched or interfering with other car parts.
- Be sure the battery cables are disconnected.
- After completing repair work, be sure to remove the short connectors (RED) and reconnect all the connectors.
Driver's Airbag
1. Place the driver's airbag assembly in the steering wheel, and secure it with new Torx bolts.
Driver's Airbag
2. Reconnect the driver's airbag 3P connector to the cable reel 3P connector. Attach the short connector to the access panel, then reinstall the panel
on the steering wheel.
3. Remove the short connectors from the seat belt tensioners, then attach them to their holders.