NSX V6-3.2L DOHC (VTEC) (1997)
Trunk/Liftgate Sensor/Switch (For Alarm): Testing and Inspection
1. Open the trunk lid, and remove the trunk rear trim panel.
Trunk Latch Switch Test
2. Disconnect the 3P connector from the trunk latch.
Trunk Latch Switch Test
3. Check continuity at the trunk latch connector terminals.
^ There should be continuity between the B and C terminals with the trunk lid open.
^ There should be no continuity between the B and C terminals with the trunk latch in LOCK (trunk lid closed) position.