NSX V6-3.2L DOHC (VTEC) (1997)
Steering Lock Removal/Installation
5. Remove the dashboard brace.
6. Disconnect the ignition switch 7P and 8P connectors.
Steering Lock Removal/Installation
7. Remove the column holder mounting bolts and the mounting nuts, and lower the steering column assembly. Be careful not to damage the SRS wire
harness.
8. Center-punch the shear bolt, and drill its head off with a 5 mm (3/16 in) drill bit. Do not damage the switch body.
Steering Lock Removal/Installation
9. Remove the shear bolt from the switch body.
10. Insert the key, and turn it to "I".