NSX V6-3.2L DOHC (VTEC) (1997)
Suspension Strut / Shock Absorber: Service and Repair
Front Shock
REMOVAL
1. Remove the front wheel.
2. Remove the brake hose mounting bolt from the damper.
3. Separate the damper and lower arm by removing the damper mounting bolt.
4. Remove the caps from the top of the cowl, then remove the self-locking nuts.
5. Remove the damper assembly.
DISASSEMBLE
1. Compress the damper spring with the spring compressor according to the manufacturer's instructions, then remove the self-locking nut.
CAUTION: Do not compress the spring more than necessary to remove the nut.