NSX V6-3.2L DOHC (VTEC) (1997)
Throttle Valve Solenoid: Service and Repair
NOTE: Select the appropriate shim when the linear solenoid is replaced.
1. Remove the linear solenoid and shim from the transmission housing.
2. Clean the mounting surface.
3. Measure the distance between the mounting surface of the linear solenoid and the throttle valve body.
LINEAR SOLENOID INSTALLATION DISTANCE:
23.5 - 23.7 mm (0.925 - 0.933 in)
NOTE: If the measurement of distance is 21.6 mm (0.850 in), select the shim of 2.0 mm (0.079 in) to obtain the installation distance of 23.6 mm
(0.929 in).