NSX V6-3.2L DOHC (VTEC) (1997)
Valve Body: Service and Repair
Valve Body Removal
NOTE:
-
Clean all parts thoroughly in solvent or carburetor cleaner, and dry with compressed air. Blow out all passages.
-
Accumulator covers are spring loaded; to prevent stripping the threads in the torque converter housing, press down on the accumulator covers
while unscrewing the bolts in a crisscross pattern.
1. Remove the valve body in the following numbered sequence.
CAUTION: Do not use a magnet to remove the check balls; it may magnetize the balls.