NSX V6-3.2L DOHC (VTEC) (1997)
[NEW]
3. Test-drive the vehicle.
^
If the creak is gone, return the vehicle to the customer.
^
If you still hear the creak, but it goes away when you lower the window glass at least 1 mm, continue with step 4.
[NEW]
4. Remove the door panel. (Refer to section 20 of the Service Manual for door panel removal.)
[NEW]
5. Lower the glass halfway. Then, loosen the two glass stop plate nuts, lower the plates 1 mm, retighten the nuts, and reinstall the door panel.
[NEW]
NOTE:
Do not lower the glass more than 1 mm or you may cause a water leak.
[NEW]
6. Test-drive the vehicle to make sure the creak is gone.