RDX L4-2.3L Turbo (2008)
Cellular Phone: Symptom Related Diagnostic Procedures
The HFL Messages Cannot Be Heard of Are Weak
The HFL messages cannot be heard of are weak
1. Turn the ignition switch to ON (II).
2. Check that the audio system is operating normally and the speaker sound levels from different audio sources (AM/FM, XM, CD/DVDs,
Navigation, etc.).
Does the audio system work normally and is the audio output from the speaker normal when playing various audio sources?
YES - Go to step 3.
NO - Refer to the audio system symptom troubleshooting See: Radio, Stereo, and Compact Disc/Testing and Inspection/Symptom Related
Diagnostic Procedures/Audio System/Index, Symptom Troubleshooting.
3. Press the HFL talk button.
Does the audio system mute when HFL messages are being played?
YES - Go to step 4.
NO - Go to step 9.
4. Turn the ignition switch to LOCK (0).
5. Disconnect the audio unit connector C (28P) and the HandsFreeLink control unit 22P connector.
6. Check for continuity between HandsFreeLink control unit 22P connector No. 7 and No. 19 terminals and audio unit connector C (28P) No. 27 and
No. 13 terminals.
Is there continuity?
YES - Go to step 7.
NO - Open in the wire(s) between HandsFreeLink control unit and audio unit. Replace the affected shielded harness.
7. Check for continuity between body ground and audio unit connector C (28P) No. 27 and No. 13 terminals individually.
