acura Workshop Repair Guides

Acura (Honda) Workshop Service and Repair Manuals

All Technical Service Bulletins for Speaker:|07-037|Page 7994 > < All Technical Service Bulletins for Speaker:|07-037|Page 7992
Page 1
background image

Speaker: Service and Repair

Speaker Test/Replacement

Door Speaker

1. Remove the door panel.
2. Remove the bolt. Then lift the speaker straight up to release the lower clips (A).

NOTICE:
If you pull the speaker out too far from the door, you will damage the lower clips.

3. Disconnect the 2P connector (B), and remove the speaker.
4. Measure the resistance between the No. 1 and No. 2 terminals. There should be about 2 ohms.
5. If the resistance is not as specified, replace the door speaker.

Front Center Speaker (With ELS Audio System)

1. Remove the dashboard center upper panel.
2. Remove the screws, then pull out the speaker (A).

3. Disconnect the 2P connector (B), and remove the speaker.
4. Measure the resistance between the No. 1 and No. 2 terminals. There should be about 4 ohm.
5. If the resistance is not as specified, replace the front center speaker.

Front Door Tweeter (with premium audio system)

1. Detach the clip (A) and remove the door mirror garnish (B). Then disconnect the connector (C).

All Technical Service Bulletins for Speaker:|07-037|Page 7994 > < All Technical Service Bulletins for Speaker:|07-037|Page 7992