RDX L4-2.3L Turbo (2008)
Front Door Window Regulator: Service and Repair
Front Door Glass and Regulator Replacement
NOTE: Put on gloves to protect your hands.
1. Remove the door panel.
2. Disconnect the power door lock actuator connector (A), and remove the plug caps (B).
3. Detach the connector clip (C), and pass the harnesses (D) through the slits (E) in the plastic cover (F), then remove the plastic cover.
4. Carefully raise the glass (A) until you can see the bolts, then remove them. Carefully pull the glass out through the window slot. Take care not to
drop the glass inside the door.