RDX L4-2.3L Turbo (2008)
Rear Door Latch: Service and Repair
Rear Door Latch Replacement
NOTE: Put on gloves to protect your hands.
1. Raise the glass fully.
2. Remove the door panel.
3. Remove the plastic cover, as needed.
4. Remove the screws and nut securing the latch (A).
5. Detach the rod fastener.
6. Disconnect the outer handle rod from the outer handle.
7. Detach the latch cable (A) and inner handle cable (B) from the holder (C), and lower the latch (D). Remove the latch out from between the rear
lower channel (E) and the door. Take care not to bend the outer handle rod, latch cable, and inner handle cable.
