RDX L4-2.3L Turbo (2008)
Rear Door Panel: Service and Repair
Rear Door Panel Removal/Installation
Special Tools Required
-
KTC trim tool set SOJATP2014 *
-
Trim pad remover, Snap-on A 177A or equivalent, commercially available
* Available through the American Honda Tool and Equipment Program.
NOTE:
-
Use the appropriate tool from the KTC trim tool set to avoid damage when prying components.
-
Take care not to scratch the door and related parts.
1. Raise the glass fully.
2. Using the appropriate trim tool, pry out on the lower portion of the inner handle cap (A) to release the hooks (B, C).
3. Remove the screws (A, B) from the inner handle (C).
4. Remove the screw.
