RDX L4-2.3L Turbo (2008)
Rear Door Window Regulator: Service and Repair
Rear Door Glass and Regulator Replacement
NOTE: Put on gloves to protect your hands.
1. Remove the door panel.
2. Detach the harness clip (A), and disconnect the power door lock actuator connector (B). Remove the plug caps (C).
3. Pass the harness (D) through the slit (E) in the plastic cover (F), then remove the plastic cover.
4. Carefully lower the glass (A) until you can see the bolts, then remove them. Carefully lower the glass into the door. Take care not to drop the glass
inside the door.