RDX L4-2.3L Turbo (2008)
Front Fender Liner: Service and Repair
Front Inner Fender
Front Inner Fender Replacement
NOTE: Take care not to scratch the body.
1. Remove the front inner fender(A).
1. On the back of the wheel arch, remove the screws (B, C, D).
2. From under the front bumper (E), remove the clip (F) securing the front bumper, splash shield (G), and front inner fender.
3. From the wheel arch, remove the clips (H) securing the front inner fender (and splash shield) to the body.
4. Remove the front inner fender.
2. Install the inner fender in the reverse order of removal, and note these items:
-
Check if the clips are damaged or stress-whitened, and if necessary, replace them with new ones.
-
Push the clips into place securely.