RDX L4-2.3L Turbo (2008)
Arm Rest: Service and Repair
Rear Seat Armrest
Rear Seat Armrest Replacement
NOTE: Take care not to tear the seams or damage the seat covers.
1. Gently pull forward on the top edge of the armrest center cover (A) to release the hook (B), then push forward to remove the cover.
2. Remove the pivot bolt, wave washer (A), washer (B), armrest washer (C), and 6 mm bolt (D).
3. Slide the armrest (A) toward the driver's side of the vehicle, and remove the center pin (B) from the frame (C) by pulling back on the armrest.
4. Install the armrest in the reverse order of removal.
