RDX L4-2.3L Turbo (2008)
Spoiler: Service and Repair
Tailgate Spoiler Trim Replacement
NOTE: Take care not to scratch the tailgate spoiler trim and tailgate.
1. From inside the tailgate, remove the bolts (A).
2. Remove the tailgate upper trim panel.
3. Remove the tailgate spoiler trim (B).
1. From inside the tailgate, release the clip (C).
2. Close the tailgate, then lift the tailgate spoiler trim to detach the clips (D).
3. Disconnect the rear window wiper washer tube (E).
4. Remove the grommet (F) from the tailgate, then disconnect the high mount brake light connector (G).
4. Install the trim in the reverse order of removal, and note these items:
-
Check if the clips are damaged or stress-whitened, and if necessary, replace them with new ones.
-
Make sure the rear window wiper washer tube is connected securely, and the high mount brake light connector is plugged in properly.
