RDX L4-2.3L Turbo (2008)
5. Remove the driver's cowl panel (A).
1. Remove the clips (B).
2. Release two front hooks (C) from the edge of the cover.
3. Detach the clips (D, E) by carefully pulling the cover upward, then remove the cover. Take care not to scratch the body.
6. Install the cover in the reverse order of removal, and note these items:
-
Check if the clips are damaged or stress-whitened, and if necessary, replace them with new ones.
-
Make sure the washer tube is connected securely.
-
Push the clip portions into place securely.
