RDX L4-2.3L Turbo (2008)
Rear Door Weatherstrip: Service and Repair
Rear Door Weatherstrip
Rear Door Weatherstrip Replacement
NOTE:
-
Put on gloves to protect your hands.
-
Take care not to scratch the door.
-
Use a clip remover to remove the clips.
1. At the B-pillar, remove the door checker mounting bolt (A).
2. Detach the clips (B, C, D), then remove the door weatherstrip (E).
3. Install the weatherstrip in the reverse order of removal, and note these items:
-
Check if the clips are damaged or stress-whitened, and if necessary, replace them with new ones.
-
Make sure the weatherstrip is installed in the holder (F) securely.
-
Apply medium strength type liquid thread lock to door checker mounting bolt before installation.
-
Check for water leaks.
