RDX L4-2.3L Turbo (2008)
Traction Control Switch: Testing and Inspection
VSA OFF Switch Test
1. Make sure the ignition switch is OFF.
2. Remove the VSA OFF switch (A) from the switch panel.
3. Disconnect the VSA OFF switch 5P connector.
4. Check for continuity between VSA OFF switch 5P connector terminals No. 1 and No. 2. There should be continuity when the switch is pushed.
5. Check for continuity between VSA OFF switch 5P connector terminals No. 4 and No. 5. There should be continuity at all times.