RDX L4-2.3L Turbo (2008)
Brake Master Cylinder: Testing and Inspection
Master Cylinder Inspection
1. Inspect and note these items:
-
Before reassembling, check that all parts are free of dirt and other foreign particles.
-
Do not try to disassemble the master cylinder assembly. Replace the master cylinder assembly with a new part if necessary.
-
Do not allow dirt or foreign matter to contaminate the brake fluid.
2. If the reservoir hose was disconnected, install the reservoir (A) and the reservoir hose (B) to the subreservoir (C).
NOTE:
-
Align the rib plates (D) on the reservoir and subreservoir with the paint marks (E) on the hose.
-
Position the clamp (F) as shown.