RDX L4-2.3L Turbo (2008)
9. Remove the brake booster mounting nuts (C).
10. Pull the brake booster (A) forward, then move the brake booster to the front side while turning it.
11. Remove the brake booster upward from the engine compartment.
NOTICE
-
Be careful not to damage the booster surfaces and threads of the booster stud bolts.
-
Be careful not to bend or damage the brake lines.
12. Install the brake booster in the reverse order of removal, and note these items:
-
Adjust the pushrod length before installing the brake booster.
-
Always use a new lock pin.
-
Install the master cylinder after installing the brake booster.
-
Adjust the brake pedal height and free play after installing the master cylinder.
-
Bleed the brake system.
