RDX L4-2.3L Turbo (2008)
Fan Shroud: Service and Repair
Fan, Fan Motor, Shroud Removal and Installation
Removal
1. Remove the splash shield.
2. Disconnect the fan motor connectors (A), and remove the harness clamps (B).
3. Remove the clip (A), then remove the coolant reservoir (B) from the holder.
4. Remove the clips (A), then remove the support rod clamp bracket (B).
5. Remove the condenser fan shroud assembly (A), then remove the radiator fan shroud assembly (B) from the condenser fan shroud side.