RDX L4-2.3L Turbo (2008)
2. Install the upper water outlet (A) with a new O-ring (B), then install the upper radiator hose (C), water bypass hose (D), and harness holder bracket
(E).
3. Install the EVAP canister purge valve mounting bracket.
4. Install the harness holder.
5. Install the engine wire harness connectors and wire harness clamps to the cylinder head.
^
Camshaft position (CMP) sensor A (Intake) connector
^
Camshaft position (CMP) sensor B (Exhaust) connector
^
EVAP canister purge valve connector
6. Install the ignition coil cover (A) and fuel feed pipe mounting bolt (B).
